GRK R4 Multi-Purpose Screw is a versatile fastener that delivers increased productivity for hundreds of applications. Its feature-rich design provides a fast and reliable connection every time. R4 Multi-Purpose Screws have a Climatek Coating for installation in both interior and exterior conditions where exposure to moisture is intermittent and is code-approved for use in treated lumber.
GRK R4 Multi-Purpose Screw is a versatile fastener that delivers increased productivity for hundreds of applications. Its feature-rich design provides a fast and reliable connection every time. R4 Multi-Purpose Screws have a Climatek Coating for installation in both interior and exterior conditions where exposure to moisture is intermittent and is code-approved for use in treated lumber.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ip.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ip.
GRK FIN/Trim Head Screws are an excellent choice for most fine carpentry applications, as well as window extension jambs and more. GRK FIN/Trim Head screws have the smallest screw head available and range in length from 1-1/4-Inch to 5-Inch. Almost all material splitting is prevented because of the Trim Head screw's exceptional small head and the W-cut thread design. Pre-drilling is only necessary if the material's limitations require a pilot hole to be drilled, as in hardwoods like Mahogany and Ip.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ip.
These #8 by 2-1/2-inch white cabinet screws are specifically designed for uses in cabinet construction and installation. The washer head design presses flush against any cabinet surface. These white Washer head, T15 bit size, self-tapping w-cut thread design Screws come in a pack of 80.
These low profile cabinet screws are made of case hardened steel for high tensile, torque and shear strength. These white cabinet screws are for interior use only.
GRK R4 Multi-Purpose Screw is a versatile fastener that delivers increased productivity for hundreds of applications. Its feature-rich design provides a fast and reliable connection every time. R4 Multi-Purpose Screws have a Climatek Coating for installation in both interior and exterior conditions where exposure to moisture is intermittent and is code-approved for use in treated lumber.
GRK RT Composite™ screw is a specially designed fastener for attaching composite and cellular PVC materials. The RT Composite has a reverse threading under the head of the fastener that helps the screw head disappear beneath the surface and eliminate mushrooming when installing Composite materials. RT Composite Screws have a Climatek™ Coating for installation in both interior and exterior conditions where exposure to moisture is intermittent and is code-approved for use in treated lumber.
GRK RT Composite TRIM Head Screws have the smallest screw head available and work great for most fine carpentry applications. Most material splitting is prevented because of the TRIM Head screw's exceptionally small head and the W-Cut thread design. The RT screws include a reverse threading under the head of the fastener. GRK has found that the reverse thread helps the screw head disappear beneath the surface of the classic wood composite material, reducing or eliminating the dimple that sometimes appears. Some sizes are available in PHEINOX Stainless Steel.
Star Carbon Steel 025 in Hex Shank Impact Power Bit Features. Extended tip for secure grip. Fits Trim Head 8 screws. 25 PieceSpecifications. Finish Red. Size T15. Country of Origin United States. Material Carbon Steel. Drive Type Star. Shank Type Hex Shank. Length 2 in. Shank Diameter 14 in. Magnetic No. Impact Rated Yes. Weight 068 lbs
Star Carbon Steel 025 in Hex Shank Impact Power Bit Features. Extended tip for secure grip. Fits Trim Head 8 screws. 25 PieceSpecifications. Finish Yellow. Size T10. Country of Origin United States. Material Carbon Steel. Drive Type Star. Length 2 in. Shank Diameter 14 in. Magnetic No. Impact Rated Yes. Weight 062 lbs
Star Carbon Steel 025 in Hex Shank Impact Power Bit Features. Extended tip for secure grip. To be used with Caliburn XL washer head screws and 38 in. RSS rugged structural screws. 25 PieceSpecifications. Finish Blue. Size T40. Country of Origin United States. Material Carbon Steel. Shank Type Hex Shank. Length 2 in. Shank Diameter 14 in. Magnetic No. Impact Rated Yes. Weight 148 lbs
Star Carbon Steel 025 in Hex Shank Impact Power Bit Features. Extended tip for secure grip. To be used with GRK 516 in and 38 in. RSS screws and Caliburn tapered and pan head screws. 25 PieceSpecifications. Finish Black. Size T30. Country of Origin United States. Material Carbon Steel. Shank Type Hex Shank. Length 2 in. Shank Diameter 14 in. Magnetic No. Impact Rated Yes. Weight 074 lbs
GRK RSS PHEINOX Stainless Steel Rugged Structural Screw has a patented design and made of specially hardened steel to provide customers with high tensile, torque and shear strength. The sharp threads and points bite instantly into material, including hardwood, reducing the splitting effect due to smaller shanks. The GRK RSS series screws that are 3-1/8-Inch and longer have six CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can lower the driving torque and reduce splitting. The round head with built-in washer type head shield does not have any sharp edges like conventional lag screws.
GRK R4 Multi-Purpose Screw is a versatile fastener that delivers increased productivity for hundreds of applications. Its feature-rich design provides a fast and reliable connection every time. R4 Multi-Purpose Screws have a Climatek Coating for installation in both interior and exterior conditions where exposure to moisture is intermittent and is code-approved for use in treated lumber.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ip.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ip.
GRK R4 self-countering screw has a new under head with saw-blade like cutting teeth and six self-contained cutting pockets. Together they Act similar to a circular saw blade, transporting the drill dust away from the edge of the screw hole while cutting A perfectly clean hole into even the most brittle materials without cracking any surface treatment. This design also further enhances the R4 versatility by allowing the fastener to be installed without Countersinking into even the hardest woods. The R4 screw closes the hole off with precision, leaving no damaged fibers around the head. Applications include wood, particle board, plastic, sheet metal, cement Fiberboard, composite decking, wood decking and melamine.
The screws are using self tapping specially hardened steel screw, W-Cut thread design as zip tip, climatek coated, sharp threads and points to built in washer for interior or exterior use and its ideal for use in anchoring to concrete or wood to concrete applications including basement framing and sheds.; ; Brand Name: GRK Fasteners Callout Size: No. 20 Length: 5-1/8 in. Drive Style: Star Head Type: Washer Head Product Type: Structural Screws Number in Package: 50 pk Driver Bit Included: No Color: Yellow Indoor or Outdoor: Indoor and Outdoor Diameter: 5/16 in. Self Drilling: Yes Finish: Climacoat Packaging Type: Clamshell Thread Type: Self Tapping Material: Steel Self Tapping: Yes
The screws are using self tapping specially hardened steel screw, W-Cut thread design as zip tip, climatek coated, sharp threads and points to built in washer for interior or exterior use and its ideal for use in anchoring to concrete or wood to concrete applications including basement framing and sheds.; ; Brand Name: GRK Fasteners Callout Size: 3/8 in. in. Length: 10 in. Drive Style: Star Head Type: Washer Head Product Type: Structural Screws Number in Package: 25 pk Driver Bit Included: No Color: Yellow Indoor or Outdoor: Indoor and Outdoor Diameter: 3/8 in. Self Drilling: Yes Finish: Climacoat Packaging Type: Boxed Thread Type: Self Tapping Material: Steel Self Tapping: Yes
GRK RSS #5/16 X 4" RUGGED STRCTRL SCREW IN; Callout Size: No. 20; Length: 4 in.; Drive Style: Star; Head Type: Round; Finish: Yellow Zinc; Material: Steel; Product Type: Structural Screws; Container Size: 50 per box; Number in Package: 50 pc.; Packaging Type: Clamshell; Self Drilling: Yes; Diameter: 5/16 in.; Indoor or Outdoor: Indoor and Outdoor; Thread Type: Self Tapping; Color: Yellow; Self Tapping: Yes; Self tapping as 4 inch length for specially; hardened steel screw It h as been designed as pan h; ead Recessed star drive as zero stripping with 6 po; ints of contact CEE Thr ead using enlarge hole to red; uce splitting Clim atek coated with sharp thre; ads and points Built in wa sher head for immense holdi ng power
GRK's Trim Head screws are an excellent choice for most fine carpentry applications, as well as window extension jambs and more. The Trim Head screws have the smallest screw head available; with screw lengths of 3-1/8". Most material splitting is prevented because of the Trim Head screw's exceptionally small head and the W-Cut thread design. 100 count Recessed star drive zero stripping, with 6 points of contact Trim head for a clean finished look Reverse threads eliminate mushrooming W-Cut low torque and faster drive Zip-Tip no pre-drilling, faster penetration ESR-3201 approved for structural application Case hardened steel for high tensile, torque and shear strength For interior/exterior use Climatek coating is AC257 code approved for use in treated lumber Package type: Handy-Pack. Specifications Series: RT Composite Finish: White Type: Exterior & self-tapping Screw size: #8 Length Under Head: 3-1/8 in Head Style: Trim.
2 inch long, 1/4 inch standard hexagonal shank power drill accessory. For use with Caliburn XL and some RSS Structural Screws. Blue color for identification. Provides 6 positive, 1/4 inch flutes for a non-slip drive with 12 points of contact (6 points driving and 6 points in reverse). T-40 Carded Bits. All carded bits are 2 bits per card.
GRK R4 Multi-Purpose Screws are self-tapping with a countersinking head. They require no pre-drilling. This self-countersinking screw has a new underhead with saw-blade like cutting teeth and six self-contained cutting pockets. This transports the drill dust away from the edge of the screw hole while cutting a perfectly clean hole without cracking the surface. The screw head closes the hole off with precision, leaving no damaged fibers around the head. The R4 is available in 59 sizes and works well in wood, particle board, plastic, sheet metal, cement fiberboard, composite decking, wood decking, and melamine. Some sizes are available in PHEINOX Stainless Steel.
GRK R4 Multi-Purpose Screws are self-tapping with a countersinking head. They require no pre-drilling. This self-countersinking screw has a new underhead with saw-blade like cutting teeth and six self-contained cutting pockets. This transports the drill dust away from the edge of the screw hole while cutting a perfectly clean hole without cracking the surface. The screw head closes the hole off with precision, leaving no damaged fibers around the head. The R4 is available in 59 sizes and works well in wood, particle board, plastic, sheet metal, cement fiberboard, composite decking, wood decking, and melamine. Some sizes are available in PHEINOX Stainless Steel.
GRK R4 Multi-Purpose Screws are self-tapping with a countersinking head. They require no pre-drilling. This self-countersinking screw has a new underhead with saw-blade like cutting teeth and six self-contained cutting pockets. This transports the drill dust away from the edge of the screw hole while cutting a perfectly clean hole without cracking the surface. The screw head closes the hole off with precision, leaving no damaged fibers around the head. The R4 is available in 59 sizes and works well in wood, particle board, plastic, sheet metal, cement fiberboard, composite decking, wood decking, and melamine. Some sizes are available in PHEINOX Stainless Steel.
GRK R4 Multi-Purpose Screws are self-tapping with a countersinking head. They require no pre-drilling. This self-countersinking screw has a new underhead with saw-blade like cutting teeth and six self-contained cutting pockets. This transports the drill dust away from the edge of the screw hole while cutting a perfectly clean hole without cracking the surface. The screw head closes the hole off with precision, leaving no damaged fibers around the head. The R4 is available in 59 sizes and works well in wood, particle board, plastic, sheet metal, cement fiberboard, composite decking, wood decking, and melamine. Some sizes are available in PHEINOX Stainless Steel.
GRK R4 Multi-Purpose Screws are self-tapping with a countersinking head. They require no pre-drilling. This self-countersinking screw has a new underhead with saw-blade like cutting teeth and six self-contained cutting pockets. This transports the drill dust away from the edge of the screw hole while cutting a perfectly clean hole without cracking the surface. The screw head closes the hole off with precision, leaving no damaged fibers around the head. The R4 is available in 59 sizes and works well in wood, particle board, plastic, sheet metal, cement fiberboard, composite decking, wood decking, and melamine. Some sizes are available in PHEINOX Stainless Steel.
GRK R4 Multi-Purpose Screws are self-tapping with a countersinking head. They require no pre-drilling. This self-countersinking screw has a new underhead with saw-blade like cutting teeth and six self-contained cutting pockets. This transports the drill dust away from the edge of the screw hole while cutting a perfectly clean hole without cracking the surface. The screw head closes the hole off with precision, leaving no damaged fibers around the head. The R4 is available in 59 sizes and works well in wood, particle board, plastic, sheet metal, cement fiberboard, composite decking, wood decking, and melamine. Some sizes are available in PHEINOX Stainless Steel.
GRK RSS Rugged Structural Screw has a patented design and made of specially hardened steel to provide customers with high tensile, torque and shear strength. The sharp threads and points bite instantly into material, including hardwood, reducing the splitting effect due to smaller shanks. The GRK RSS series screws that are 3-1/8-Inch and longer have six CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can lower the driving torque and reduce splitting. The round head with built-in washer type head shield does not have any sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. The RSS screws can be used as a lag screw alternative. Some sizes available is PHEINOX Stainless Steel.
GRK RSS Rugged Structural Screw has a patented design and made of specially hardened steel to provide customers with high tensile, torque and shear strength. The sharp threads and points bite instantly into material, including hardwood, reducing the splitting effect due to smaller shanks. The GRK RSS series screws that are 3-1/8-Inch and longer have six CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can lower the driving torque and reduce splitting. The round head with built-in washer type head shield does not have any sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. The RSS screws can be used as a lag screw alternative. Some sizes available is PHEINOX Stainless Steel.
GRK ICC-ESR-2442 Handy Pak 5/16 by 4-Inch Structural Screws, 100 Screws per Package
GRK RSS Rugged Structural Screw has a patented design and made of specially hardened steel to provide customers with high tensile, torque and shear strength. The sharp threads and points bite instantly into material, including hardwood, reducing the splitting effect due to smaller shanks. The GRK RSS series screws that are 3-1/8-Inch and longer have six CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can lower the driving torque and reduce splitting. The round head with built-in washer type head shield does not have any sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. The RSS screws can be used as a lag screw alternative. Some sizes available is PHEINOX Stainless Steel.
GRK R4 Stainless Steel self-countersinking screw has a new underhead with saw-blade like cutting teeth and six self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting a perfectly clean hole into even the most brittle materials without cracking any surface treatment. This design also further enhances the R4's versatility by allowing the fastener to be installed without countersinking into even the hardest woods. The screw head closes the hole off with precision, leaving no damaged fibers around the head. R4 screws 2-Inch and longer have a four threaded portion of the fastener, allowing the wood to settle easily. It increases the screw's drawing strength and reduces the friction on the screw shank that lowers the driving torque. R4 stainless steel PHEINOX screws are made from the best grade of stainless steel wire offer a limited lifetime warranty against staining and rusting.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.
GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut thread design. Pre-drilling is usually only necessary in extreme hardwoods like Mahogany or Ipe'. Some sizes are availabele in PHEINOX stainless steel.
GRK RSS Rugged Structural Screw has a patented design and made of specially hardened steel to provide customers with high tensile, torque and shear strength. The sharp threads and points bite instantly into material, including hardwood, reducing the splitting effect due to smaller shanks. The GRK RSS series screws that are 3-1/8-Inch and longer have six CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can lower the driving torque and reduce splitting. The round head with built-in washer type head shield does not have any sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. The RSS screws can be used as a lag screw alternative. Some sizes available is PHEINOX Stainless Steel.
GRK RSS Rugged Structural Screw has a patented design and made of specially hardened steel to provide customers with high tensile, torque and shear strength. The sharp threads and points bite instantly into material, including hardwood, reducing the splitting effect due to smaller shanks. The GRK RSS series screws that are 3-1/8-Inch and longer have six CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can lower the driving torque and reduce splitting. The round head with built-in washer type head shield does not have any sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. The RSS screws can be used as a lag screw alternative. Some sizes available is PHEINOX Stainless Steel.
Increase tree growth and productivity with Arizona's Best Fruit and Nut Tree Fertilizer. Fertilizer contains a combination of plant nutrients needed to maximize trees potential. Compatible with all kinds of nut trees, fruit trees, grapes and cane berries. Sold in a 20lb bag.
Increase active growth of plants and grasses with Arizona's Best All Purpose Fertilizer. The well balanced formula is ideal for shrubs. Product contains 10% sulfur and 5% iron. Sold in a 20lb bag.
Color: AlmondFeatures:
Cable Size: 11/2 in
Material: Plastic
Usage: For Used in Backs Computer Cables Desk Tops Electrical Cords and Phone Cords
Keeps cables organized for a clean look
Cable management for desk
PartNumber: 61600Details: For cable management. Organizes electrical cords, phone cords, computer cables and more. comptr grommet almd1-1/2UPC: 740265616003EAN: 0740265616003Model: 3396678Binding: Tools & Home ImprovementItem Condition: New
